Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Anchor Guest 3.2.171.6 Web Authentication page issue

Hi folks,

I'm having issues with our Anchor controller here running 3.2.171.6. Using a chain certificate for our Web authentication re-direct Page to a WEB-server. sometimes the Guest Clients are not re-directed to the WEb authentication page. After I reboot the Anchor this resolves the issue. I need to use this code to support the ipsec vpn module. any ideas would be appreciated.

3 REPLIES

Re: Anchor Guest 3.2.171.6 Web Authentication page issue

you need to try to find a non-chained certificate. I know that most CA do not use these anymore, but need to find one. WLC does not support chained-certificate until 5.2. It may work, but it is not supported.

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Hall of Fame Super Silver

Re: Anchor Guest 3.2.171.6 Web Authentication page issue

RapidSSL offers root CA certs which you can use and load onto the wlc to avoid the certificate error issue.

-Scott
*** Please rate helpful posts ***
New Member

Re: Anchor Guest 3.2.171.6 Web Authentication page issue

My mistake guys , this is in fact a root CA. Wondering if anyone can point me to a bug code that might explain this issue.

175
Views
0
Helpful
3
Replies