Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Another Bonjour issue

Hi all,

I need hel pin configuring Bonjour on a 2504 controller with 7.5.102.0 fw.

The controller is connected to a 2960S switch with 15.0(1)SE2.

The antennas, all AIR-LAP1242AG-E-K9, are connected to this and other 2960 (same sw).

I followed step by step this documents:

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0080bb1d7c.shtml (only multicast-muticast suported by my Wlc)

http://www.cisco.com/en/US/docs/wireless/technology/bonjour/Bonjour_Deployment.html

But without success.

Now i'm fighting with the manager that says that is impossible that on his home 30$ access point works and on our net not... you can immagine

..

Thank you,

Claudio

1 REPLY
VIP Purple

Another Bonjour issue

Since you are usng WLC 7.5.102.0 firmware here is most upto date deployment guide for this feature. Hope it is useful.

http://www.cisco.com/en/US/docs/wireless/technology/bonjour/7.5/Bonjour_Gateway_Phase-2_WLC_software_release_7.5.html

Regarding the last comment, Apple introduced this for home/consumer environment where you will work with single vlan (or unmanaged home grade switch) using link local multicast feature (mDNS). Since then users demanding to bring those sort of thing into enterprise environment (consist of multiple l3, restrictive, etc) and all wireless vendors try to support it & it is not straight forward as of home environment. That's why even Cisco improving this feature satring from 7.3, 7.4 & 7.5 codes, still may not perfect how you want it.

HTH

Rasika

**** Pls rate all useful responses ****

185
Views
0
Helpful
1
Replies
CreatePlease login to create content