Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Antenna Types for 1400 Series Wireless Bridges

Deploying 1400 Bridges in a line of site type of configuration. The distance is right at 200 meters between building, am looking for any suggestions in regards to what type of antennas to deploy to get best bandwidth and narrowest beam, since this is in an industrial area.

3 REPLIES
Bronze

Re: Antenna Types for 1400 Series Wireless Bridges

David

David if your 1400's have the built in antenna the desision has been made for you, if you have the 1400 with the antenna connection in the face of the unit you will get to choose your antenna.

For your aplcation I would use the AIR-ANT58G10SSA-N Sector antenna this should give you a excellent link.

Cisco Antenna link

http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008022b11b_ps5279_Products_Data_Sheet.html

HTH

Bill

Re: Antenna Types for 1400 Series Wireless Bridges

Hi,

If you want narrowest beamwidth then I would go with AIR-ANT58G28SDA-N antena 4.75°H,4.75°V. However comparing the cost of this antenna the one which Bill suggested I would like to go with what Bill's suggestion.

Beamwidth for AIR-ANT58G10SSA-N is 60° H, 60° V.

-> Sushil

New Member

Re: Antenna Types for 1400 Series Wireless Bridges

Thank you all for your responses... I too, was leaning towards those as well, nice to hear it from others as well...

zman

128
Views
0
Helpful
3
Replies