cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
547
Views
0
Helpful
2
Replies

any cisco admin @ here?

servisturk
Level 1
Level 1

i need help immediatly. i have 50 1552e and i need to change ios to autonomous. i send to many post what i have a problem. can any admin help me asap!!!!!

2 Replies 2

Scott Fella
Hall of Fame
Hall of Fame

The easiest way to convert is if you can join the mesh ap to a WLC then issue this on the CLI of the WLC.

config ap tftp-downgrade tftp-server-ip-address filename access-point-name

If you don't have a WLC, then it's a bit tricky and you have to look at a few way of doing it.

Using a TFTP Server to Return to a Previous Release

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

https://supportforums.cisco.com/docs/DOC-18268

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

kaaftab
Level 4
Level 4

Kindly check the following link (topic already discussed)

https://supportforums.cisco.com/thread/2206828

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: