03-18-2014 09:50 AM - edited 07-05-2021 12:28 AM
I have completed the process but not without some hiccups. I had to piece together data from different documents. Basically, there is no information out there on what one can expect during the process and, as I mentioned in the topic, HA 8500 controllers with hundereds of AP's varying in model.
Solved! Go to Solution.
03-18-2014 09:59 AM
HI,
Here is the guidline :
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html#pgfId-46645
Regards
Dont forget to rate helpful posts
03-18-2014 09:59 AM
HI,
Here is the guidline :
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html#pgfId-46645
Regards
Dont forget to rate helpful posts
03-18-2014 10:54 AM
This is the most thorough document I have seen. The documents for 7.4.121.0 code was not as clear. I wish the documentation would give an idea of how long you should expect the process to take given a certain number of access points. Also, I have not seen any documentation stating that the controller is only reachable by console (in my situation anyway) during the AP predownload process. I was not expecting to not have access to the controller via SSH & GUI for over an hour.
Thanks for your input!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: