Anyone put two wlans on two wisms into one subnet?
We have two WiSM blades on one C6500 switch. We use WiSMs as DHCP relay pointing to central DHCP. Because of the lack of IP subnets, we want to use one /22 subnets for the two WLANs(same SSID) on two wisms. Anyone tried this? Any problems with this setup?
Re: Anyone put two wlans on two wisms into one subnet?
No, not really the AP groups. My senario is as follows:
Say I have WLAN/SSID ABC on controller A of the WiSM 1. The WLAN ABC is assigned with subnet x.y.z.0/24. Now I want to add WiSM 2 to the same CAT6500 chassis. I need to create WLAN/SSID ABC on controller A of WiSM 2 as well. The most important is I want the WLAN ABC on WiSM 2 to use the same subnet x.y.z.0/24. So I will have one subnet across two WiSM modules. Is it ok to do this?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...