Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AP-1121G stuck

I have several 1121G ap's that seem to loop at boot. Following Cisco's directions and using their suggested tftp server, renamed an ios file, held the mode button till red, and the ap transferred the correct file size from tftp. Now, at boot, the ap goes directly to "no cisco ios image file" according to the led's. I repeat the process and the ap will contact the tftp server but will not transfer data. Is there any way to recover from this error ?

Thanks,

Jeff Roberts

jeffrey.roberts@coxhealth.com

  • Other Wireless - Mobility Subjects
1 REPLY
New Member

Re: AP-1121G stuck

Use your Internet browser to access the Cisco Software Center at the following URL:

http://www.cisco.com/public/sw-center/sw-wireless.shtml

Locate the access point firmware and utilities section and click on the link for the 1100 or 1200 series access point.

Double-click the latest firmware image file, such as c1100-k9w7-tar.122-11.JA.tar for 1100 series access points or c1200-k9w7-tar.122-11.JA.tar for 1200 series access points.

Download the access point image file to a directory on your PC hard drive.

166
Views
0
Helpful
1
Replies
This widget could not be displayed.