Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AP 1131 unreachable

I've 12 APs 1131 connected to Catalyst 3560 POE without controller; once a day, randomly, all access point began unreachable to ping and all wireless client disconnected. I need to shut and no shut all switches port in order to reboot APs and normalize the wireless network.

1131 runs c1130-k9w7-mx.123-8.JA2

3560 runs c3560-ipbasek9-mz.122-40.SE

The fastethernet port configuration for all AP is:

interface FastEthernet0

no ip address

no ip route-cache

duplex auto

speed auto

hold-queue 160 in

and for switch is:

interface FastEthernet0/X

switchport trunk encapsulation dot1q

switchport trunk allowed vlan 1,2,111

switchport mode trunk

Vlan 1: Management (IP Address)

Vlan 2: Data

Vlan 111: Voip

Any ideas?

Thanks,

Stefano

232
Views
0
Helpful
0
Replies