Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

AP-1131AG radiation pattern

Hi All

How should I mount an AP-1131AG for the best coverage area? vertical(wall) , Horizontal(ceiling).

Thank you.

4 REPLIES
Silver

Re: AP-1131AG radiation pattern

The 1131AG AP is meant to hang horizontally on the ceiling. The radiation pattern is an omnidirectional "donut", which extends out from the LED ring in the center.

http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html

Waaaaay at the bottom is a description of the 1131 radiation pattern.

New Member

Re: AP-1131AG radiation pattern

Thank you. Jeff

From the E-Plane radiation ,Can I mount on the wall ?. or If I mount on the middle of room (Vertical ) what is the effect?

Thanks you.

KO

Green

Re: AP-1131AG radiation pattern

You can hang it on the wall. The effect will be to change the polarity of the pattern by 90 degrees (to horizontal), which may or may not be detrimental, depending on the client.

Usually you'd be looking at ~3dB or so drop for a polarization mismatch.

Good Luck

New Member

Re: AP-1131AG radiation pattern

Hi Scott,

Thank you for your advice.

816
Views
0
Helpful
4
Replies
CreatePlease to create content