Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AP 1131AG

Hi all, is it possible to disable the light on an AP 1131 AG by software or if not by hardware^

Thanks.

Ben

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: AP 1131AG

Hi Ben,

Give this a try;

config ap led-state

To enable or disable the LED-State for an access point, use the config ap led-state command.

config ap led-state {enable | disable} {Cisco_AP | all}

Syntax Description

config

Display configurations.

ap

Advanced parameters.

led-state

Enable or disable the LED-State for an access point.

{enable | disable}

Enable or disable the access point's LED-State.

{Cisco_AP | all}

Name of a Cisco lightweight access point or all to specify all access points.

http://www.cisco.com/en/US/docs/wireless/controller/4.1/command/reference/clic1.html#wp2384867

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: AP 1131AG

Hi Ben,

Give this a try;

config ap led-state

To enable or disable the LED-State for an access point, use the config ap led-state command.

config ap led-state {enable | disable} {Cisco_AP | all}

Syntax Description

config

Display configurations.

ap

Advanced parameters.

led-state

Enable or disable the LED-State for an access point.

{enable | disable}

Enable or disable the access point's LED-State.

{Cisco_AP | all}

Name of a Cisco lightweight access point or all to specify all access points.

http://www.cisco.com/en/US/docs/wireless/controller/4.1/command/reference/clic1.html#wp2384867

Hope this helps!

Rob

New Member

Re: AP 1131AG

Hi Rob,

Thanks a lot for your help.

You point me in the right direction.

The exact command for this model is :

config led display off

Thanks again and have a good day.

Ben

Hall of Fame Super Red

Re: AP 1131AG

Good stuff Ben! Thanks for posting back with your actual results (very helpful my friend :)

Cheers!

Rob

276
Views
0
Helpful
3
Replies
CreatePlease login to create content