I am trying to convert Airnet 1220 AP's from thick to thin so I can use a 4400 WLAN controller. I've upgraded the AP's to the latest firmware release. When I use the upgrade tool I receive the following error in the error log.
2008/10/08 21:27:40 INFO 192.168.15.215 User has Full privilege
2008/10/08 21:27:40 INFO 192.168.15.215 Getting AP Name
2008/10/08 21:27:40 INFO 192.168.15.215 AP has 12.3(7)JA Image or greater
2008/10/08 21:27:40 INFO 192.168.15.215 Term Length configured.
2008/10/08 21:27:41 INFO 192.168.15.215 Upgrade Tool supported AP
2008/10/08 21:27:41 ERROR 192.168.15.215 AP does not have Supported Radio
The upgrade fails at this point. Is there anyway around this?
Yeah, sorry to be the bearer of bad news :/ I should also point out that you can install an a-radio and it will also allow you to upgrade it, but either way you'll need to purchase and install a new radio.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...