08-28-2013 01:28 AM - edited 07-04-2021 12:43 AM
AIR-CAP3502I-N-K9 is currently having LWAPP image version 7.0.112.74.
Software Name is "ap3g1-rcvk9w8-mx" and Version 12.4(23c)JA3.
I want it to register with Virtual WLC. Which Software i should put to make it work..? Coz I didnt know how to find 7.3 software
Please provide me the link to download the software..
Any quick help would be appreciated.
Thanks.
Message was edited by: Prasan Venky
Solved! Go to Solution.
08-28-2013 05:06 AM
If you join the AP to a WLC that is running v7.3 or later, then that AP will be able to join your vWLC. If not, you need to download this code and upload it to the AP:
WIRELESS LAN RECOVERY
ap3g1-rcvk9w8-tar.152-4.JA1.tar
https://supportforums.cisco.com/docs/DOC-26765#Access_Points_Requirement
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
08-28-2013 03:55 AM
You just let the AP join the WLC and it will download the image from the WLC.
When the AP joins it updates its software from the WLC.
The vWLC however requires 7.3 or later to work.
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"
08-28-2013 04:33 AM
Which WLC i should let it join first..?
08-28-2013 05:06 AM
If you join the AP to a WLC that is running v7.3 or later, then that AP will be able to join your vWLC. If not, you need to download this code and upload it to the AP:
WIRELESS LAN RECOVERY
ap3g1-rcvk9w8-tar.152-4.JA1.tar
https://supportforums.cisco.com/docs/DOC-26765#Access_Points_Requirement
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide