Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AP association issue

I have several AP that can't associate with the controller.

When I use the debug lwapp option and when I'm connected in console on the APs, I can see that the AP don't send the LWAPP discovery request.

Any idee?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: AP association issue

If you are able to console into the AP and do not see the discovery process, check to see if the AP's are autonomous and not LWAPP. Enter any lwapp commands like : show lwapp ip config. If you get an error then you got the wrong ap or you will need to convert to lwapp. Better yet, do a show ver and see.

-Scott
*** Please rate helpful posts ***
3 REPLIES
New Member

Re: AP association issue

Are there any logs that you can post? How many AP's do you have & how many is your Controller licensed for?

Double check the VLAN configurations on all ports as well as DHCP Option 43 and DNS to see if you're missing anything, also reachability from the local switch back to the Controller.

Hall of Fame Super Silver

Re: AP association issue

If you are able to console into the AP and do not see the discovery process, check to see if the AP's are autonomous and not LWAPP. Enter any lwapp commands like : show lwapp ip config. If you get an error then you got the wrong ap or you will need to convert to lwapp. Better yet, do a show ver and see.

-Scott
*** Please rate helpful posts ***
New Member

Re: AP association issue

Indeed it was autonomous AP. Our provider made a mistake in the delivery.

I have converted them into light AP and it works now.

126
Views
0
Helpful
3
Replies
CreatePlease to create content