cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
863
Views
0
Helpful
9
Replies

AP at remote office and WLC in HQ

ittechk4u
Level 1
Level 1

Hello Experts,

I am new to wireless technology,May be its a silly question. but My manager asked me to find the solution of this.

Can we control the remote AP via WLC , whcih is located at HQ:  yes or no

If yes then can you please tell me the way to configure ?

Thanks in advance.

4 Accepted Solutions

Accepted Solutions

Sandeep Choudhary
VIP Alumni
VIP Alumni

Yes you can.

Cisco has a controller design called FlexConnect (also called HREAP). Where you can deploy access points in the branch where clients will get a local branch IP address, local switching. Or you can bring all the traffic back to the controller, Central switch.

Regards

View solution in original post

Yes you can use 2504 WLC at remote.

which wlc should you use ,It depends on the size of your entrprize.

2504 is mostly used for small enterprizes, for medium or larger you can go with 5508 series wlc.

Reagrds

Dont forget to rate helpful posts

View solution in original post

yes 1600 series AP supports flexconnect and 1600AP need minimum 7.4.100.0 version.

Check here the link for compatibility:

FlexConnect Feature Matrix

http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112042-technote-product-00.html

Cisco Wireless Solutions Software Compatibility Matrix

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Note: Please use 7.4.121.0 version instaed of 7.4.100.0 due to bugs.

Regards

Dont forget to rate helpful posts

View solution in original post

9 Replies 9

Sandeep Choudhary
VIP Alumni
VIP Alumni

Yes you can.

Cisco has a controller design called FlexConnect (also called HREAP). Where you can deploy access points in the branch where clients will get a local branch IP address, local switching. Or you can bring all the traffic back to the controller, Central switch.

Regards

Thanks,

Can I use 2504 WLC at HQ or should I use another WLC ?

Yes you can use 2504 WLC at remote.

which wlc should you use ,It depends on the size of your entrprize.

2504 is mostly used for small enterprizes, for medium or larger you can go with 5508 series wlc.

Reagrds

Dont forget to rate helpful posts

Thanks again.

One more last question:

1600 AP support 2504 WLC, flexconnect ???

Can you please provide the link where i can see the compatibility for wlc , AP and flexconnection.

yes 1600 series AP supports flexconnect and 1600AP need minimum 7.4.100.0 version.

Check here the link for compatibility:

FlexConnect Feature Matrix

http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112042-technote-product-00.html

Cisco Wireless Solutions Software Compatibility Matrix

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Note: Please use 7.4.121.0 version instaed of 7.4.100.0 due to bugs.

Regards

Dont forget to rate helpful posts

Thanks you so much.

I will do it and come here again.

Sure, Glad to help.

Regards

Hi,

Here is a very good CiscoLive presentation you should go through

BRKEWN-2014- Architecturing Network for Branch Office with Cisco FlexConnect

If you want to wath the recorded session, you can do that as well. You can freely register for ciscolive365.com and can access all of these

https://www.ciscolive.com/online/connect/sessionDetail.ww?SESSION_ID=76360&backBtn=true

HTH

Rasika

**** Pls rate all useful resposnes ****

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: