Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

'AP Crashed Due To Software Failure'

I have an 1142 CAPWAP AP running  IOS 12.4(25e)JA$ on a 5508 controller running 7.2.103 that's frequently  reloading. WCS is reporting the reason for the reload as 'AP Crashed Due  To Software Failure'. Other 1142 APs on the same controller aren't  experiencing any problems. The AP is in autonomous mode with local switching  but central auth.

Any suggestions for how to troubleshoot this problem would be much appreciated!

Thanks,

Sean

2 REPLIES
Hall of Fame Super Silver

'AP Crashed Due To Software Failure'

You mean the AP is in FlexConnect not Autonomous:

The AP is in autonomous mode with local switching  but central auth

Have you tried to default the ap to factory and delete the images and upload a new rcv image to the AP?

Thanks,


Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
New Member

'AP Crashed Due To Software Failure'

AP, is in normal mode registered to the WLC, I'm have tryed to upgrade system bootstrap with command

'copy tftp:// /bootstrap_file.bin bs:' without succes.

205
Views
0
Helpful
2
Replies