02-09-2010 04:37 AM - edited 07-03-2021 06:29 PM
Hello everyone,
I'm trying to assign a separate interface (VLAN) to the same SSID on different APs. For this I have defined a new dynamic interface with a new vlan, I also defined an additional AP group has the same default SSID but changing the interface that is assigned. I took an AP and I've assigned to that group, but when a client is associated on that AP, controller ignores the new interface and keeps it in the interface definied at SSID at default group.
Any suggestions?
Thanks in advance.
Solved! Go to Solution.
02-12-2010 07:59 AM
frmejiugr....
When using AP-Group vlan's do the following:
It looks to me like your issue is probably with Step #3.
Hope this helps.
02-12-2010 07:59 AM
frmejiugr....
When using AP-Group vlan's do the following:
It looks to me like your issue is probably with Step #3.
Hope this helps.
02-12-2010 08:21 AM
Specific to AP group on 4.x code. I created a comprehensive step by step video and posted it on my site. Take a gander when you have a chance.
http://www.my80211.com/cisco-wlc-labs/2009/3/22/cisco-ap-group-nugget.html
If you find it helpful. Please throw some ratings my way !
Thanks
02-17-2010 11:33 PM
Thanks George for your answer.
Your tutorial is the solution but I had already found another guide very similar at cisco:
http://www.cisco.com/application/pdf/paws/71477/ap-group-vlans-wlc.pdf
Thanks you.
Regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide