Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

AP Not Booting

Hello, I am having Cisco AIR-AP1220B Series AP. It is not booting. It gives following message while booting

Testing DRAM...

(press <esc> to bypass)

DRAM OK

Power-on reset.

Copyright 1996-2000 Cisco Systems, Inc.

Copyright 1984-2000 Wind River Systems, Inc.

System ID: 000BBE6D8CA8

Motherboard: IBM405 200MHz, 8192KB FLASH, 16384KB DRAM, Revision 04

Bootstrap Ver. 1.00: FLASH, CRC 1C914641 (OK)

Initialization: OK

and halts.

All the three LED remains Green.

If I press Mode button and then power on this AP then also it does not go to any other prompt.

Is there any way to recover this AP?

Thanks & Regards

Vinay Sawant

1 REPLY
Silver

Re: AP Not Booting

The symptoms that you have identified clearly indicates a hardware issue. Usually, the mode button method solves most of the issues. If it does not help then you may have to get your AP replaced.

106
Views
0
Helpful
1
Replies
CreatePlease to create content