Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AP Rogues 'On Network'

We see several Rogue APs in our network which are, according to WCS, not 'On Network'. However, most of them do turn out to be 'On Network': their MAC address appears as connected&active in a switch port. I wonder if this is because the 'On Network' status is never re-examined after first detection? Any suggestions?

  • Other Wireless - Mobility Subjects
5 REPLIES
Silver

Re: AP Rogues 'On Network'

How is the MAC active on a switchport but not on your network?

New Member

Re: AP Rogues 'On Network'

The Rogue's MAC is active on a switchport, HENCE the Rogue is 'on the network'. But WCS says it's not on the network. How come?

New Member

Re: AP Rogues 'On Network'

A couple of questions

1) What LWAPs are you using

2) Have you enabled Rogue Location Discovery protocol

3) Have you configured dedicated Rogue detector LWAPs

4) Have you got legacy Autonomous APs on your network

New Member

Re: AP Rogues 'On Network'

1) 1130AG's.

2) Yes.

3) No, and that's the answer to my problem: I didn't know (but do know now) that Rogues On Network can only be detected by LWAPs in Rogue Detector Mode.

4) No.

So, my problem is solved.

Hall of Fame Super Gold

Re: AP Rogues 'On Network'

Forgive me but are we talking about plain Rogue AP or Rogue AP on Network Wire?

149
Views
0
Helpful
5
Replies