I recently did a conversion of 125 AP's, both 1231's, 1121's and 1242's this past month.
The problem is I have about 10 that didn't get joined to the controller. It seems like a SSC issue but i'm not sure because I see the ssc on the controller. I tried to go back to autonomous mode so I could run the upgrade tool again but that didn't seem to work.
Here is an attachment of the log file.
When I console into the AP I get the following:
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:41 by alnguyen
*Mar 1 00:00:05.457: %LINK-3-UPDOWN: Interface FastEthernet0, changed state top
*Mar 1 00:00:06.457: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEtherp
*Mar 1 00:00:23.536: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:23.566: SSC Load Current Size crypto_mykey 116, offset 3520, Save4
*Mar 1 00:00:23.566: SSC Load Current Size crypto_mykey 116, offset 4499, Save4
*Mar 1 00:00:31.683: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned 5
Translating "CISCO-LWAPP-CONTROLLER.jdnet.deere.com"...domain server (172.20.47]
*Mar 1 00:00:37.715: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
*Mar 1 00:00:45.799: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:00:53.799: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not re
*Mar 1 00:00:53.799: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses.
*Mar 1 00:01:01.835: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not re
*Mar 1 00:01:01.835: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses.
*Mar 1 00:01:02.013: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload R.
*Mar 1 00:01:02.013: %LWAPP-5-CHANGED: LWAPP changed state to DOWN
I don't believe it's an AP manager IP error because I can convert other autonomous AP's fine.
Thanks,
Greg
