One of my customers gave me an old AIR-AP350 series access point.
When you power it on it gives 3 solid amber lights, then flashes 3 solid red lights, then 3 solid green lights and then all activity stops as far as the indicator lights go. I don't get any response at all through the ethernet port and I get nothing through the serial port.
Is there anything I can do with this or is it junk?
Yes, the problem is I can't find any physical reset button on the device, and I get nothing out of the console port. Nothing, no output from the device like it is booting up, so I can't start to boot and hit escape.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...