Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

AP - WLC - WCS - Compatibility

I'm upgrading a WLC4124 wireless controller to a WLC4402 - 50 and hope to use the existing AP1030's I have already installed. I have new AIR-LAP1131AG-A-K9 models to add to the existing AP1030's. I also would like to control this with WCS. My question is where do I find compatibility information with regards to what version of WCS, WLC code(?) and AP's / AP modes (L2,L3) work together?

Hall of Fame Super Silver

Re: AP - WLC - WCS - Compatibility

The 1000 series AP's that you have are only suppored in WLC code 4.2 and earlier. I usually try to keep the WCS and WLC train at the same level for compatibility.

*** Please rate helpful posts ***
New Member

Re: AP - WLC - WCS - Compatibility

Thanks guys, fella5, how did you make that determination?

Re: AP - WLC - WCS - Compatibility

you can find controller / wcs version in the WCS config document.

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________

Re: AP - WLC - WCS - Compatibility

You can check the WLC code release notes for a list of supported APs

WCS code release notes will list the supported WLC code levels.

Generally speaking, WCS will support the WLC code levels that were released prior to the release date of that particular WCS code.

CreatePlease to create content