Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AP1131AG - Radiation Patterns?

Is there a page that shows the radiation patterns of the internal antennas in the 1131AG units?

  • Other Wireless - Mobility Subjects
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: AP1131AG - Radiation Patterns?

Hi Emily/Scott,

The radiation patterns for the integrated antennas of the 1130ap are about 9/10 of the way through the Antenna Reference Guide (attached link);

Integrated AP1130AG Antenna (Omni)

Diversity antenna package for both 2.4 GHz and 5 GHz designed for high performance in both ceiling and wall mount applications. Antennas provide hemispherical coverage and can not be removed from the Access Point. No connectors are offered for additional external antennnas.

From this doc;

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_data_sheet09186a008008883b.html

Hope this helps!

Rob

"May your heart always be joyful And may your song always be sung May you stay forever young " - Dylan
2 REPLIES
Green

Re: AP1131AG - Radiation Patterns?

I haven't seen any, but the spec sheet here:

http://www.cisco.com/en/US/products/ps6087/products_data_sheet0900aecd801b9058.html

says "360 degrees horizontal"

It was my understanding that the 360 applied to a ceiling mount, and that if you hung it on the wall, it acted more like a patch antenna (that is not mentioned in the spec sheet, so it may not be true).

Good Luck

Scott

Hall of Fame Super Red

Re: AP1131AG - Radiation Patterns?

Hi Emily/Scott,

The radiation patterns for the integrated antennas of the 1130ap are about 9/10 of the way through the Antenna Reference Guide (attached link);

Integrated AP1130AG Antenna (Omni)

Diversity antenna package for both 2.4 GHz and 5 GHz designed for high performance in both ceiling and wall mount applications. Antennas provide hemispherical coverage and can not be removed from the Access Point. No connectors are offered for additional external antennnas.

From this doc;

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_data_sheet09186a008008883b.html

Hope this helps!

Rob

"May your heart always be joyful And may your song always be sung May you stay forever young " - Dylan
498
Views
0
Helpful
2
Replies
This widget could not be displayed.