Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AP1142N & AIR-PWRINJ3 compatibility

We're deploying a project composed by AP1142N and AIR-PWRINJ3. The UTP patch cords are Category 5E. The access points work normally when powered by external power sources ( PWR-B= ). The problem occurs when access points are powered by the power injectors ( AIR-PWRINJ3 ). So, I ask for your help to the questions below:

1) The power injectors "AIR-PWRINJ3" are compatible to AP1142N, aren't ?

2) Is there some suggested procedure to troubleshooting this scenario ?

Thanks,

Leonardo.

Everyone's tags (3)
1 REPLY
Cisco Employee

Re: AP1142N & AIR-PWRINJ3 compatibility

1142 AP requires AIR-PWRINJ4 power injector.. i have seen many issues like this using PWRINJ3..  the below datasheet will let us know..

http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10092/datasheet_c78-502793.html

Regards

Surendra

7550
Views
0
Helpful
1
Replies