Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AP1250 & WLSM cards


I have a little question.

We have two Wireless LAN Services Module (WLSM) on two 6509. Firmware version on these cards: 2.4.1

It's possible to use an AP 1250 (802.11n) with our WLSM cards?

Thank you for your help

Bests Regards


Hall of Fame Super Red

Re: AP1250 & WLSM cards

Hi Sam,

It looks like 2.15.1 supports the 1250 series;

This section lists new features in release 2.15.1.

WLSE Modules Support Cisco Aironet 1250 Series Access Points

The Cisco Aironet 1250 Series Access Point is the industry's first business-class access point based on the IEEE 802.11n draft 2.0 standard. It provides reliable WLAN coverage to improve the end-user experience for both existing 802.11a/b/g clients and new 802.11n clients. The access point offers combined data rates of up to 600 Mb/s to meet the most rigorous bandwidth requirements. Users can now rely on wireless networks to deliver a similar experience to wired networks, providing mobile access to high-bandwidth data, voice, and video applications, irrespective of their location.

The Cisco Aironet 1250 Series Access Point is a next-generation wireless solution with unparalleled throughput and improved reliability and predictability for wireless connectivity. The robust Cisco Aironet 1250 series is a modular platform designed to be easily field-upgradable to support a variety of wireless capabilities. This modularity allows businesses to deploy existing wireless technologies today with the confidence that their network investment will extend to support emerging and future wireless technologies.

Detailed information and configuration procedures for the 1250 series access point are in Chapter 6 of the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points, 12.4(10b)JA & 12.3(8)JEC, which is available on at the following URL:


Note WLSE Network Management (Discovery, Inventory, Faults, Reports, Configuration and Firmware) modules support 1250 series access points that contain 802.11n radios. However, 802.11n radios are not supported in WLSE Radio Management..

From these release notes;

Hope this helps!


New Member

Re: AP1250 & WLSM cards

Thank you for this information.

Ok, WLSE supports the AP1250 but not the Radio Management.

According to the IOS documentation of the AP, I guess that the WLSM card also supports these 802.11n AP.

Bests Regards


CreatePlease login to create content