Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

AP1262 and AP1252

Does LAP 1262 must be connect WLC? or  1262 can be used as alone as AP1262?

AP1262 and AP 1252 are all belongs to LWAP? and must be controlled by WLC?

What‘s the different between AIR-AP1252AG-x-K9 and AIR-LAP1252AG-x-K9 ???  urgent need help?

AP1252 can used alone? just connect Switch and configuration can be working?

LAP1252 must be connected by WLC, and without IOS can be setting? cannot used alone with WLC??

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: AP1262 and AP1252

Currently 1262 is LWAPP only and needs WLC. however 1252 has both LWAPP and autonomous image.. 1262 doesnt have Autononmous image..

lemme know how this answered ur question

Regards
Surendra

Cisco Employee

Re: AP1262 and AP1252

Surendra is all correct.

For the 1250 the different between AP1250 and LAP1250 is the software image running on it when you receive it.

If you order a AP1250, it will come with IOS image and you will be able to run it without WLC. If you order a LAP1250, it will come with a lwapp/capwap image that will require WLC.

Note however that the hardware is IDENTICAL. You can thus re-image a AP1250 with an lwap/capwap image and make it work with a WLC and you can also re-image a LAP1250 with IOS to make it run standalone.

The trick is that the 1260 has no standalone IOS image at all.

Nicolas

===

Don't forget to rate answers that you find useful

14 REPLIES
Cisco Employee

Re: AP1262 and AP1252

Currently 1262 is LWAPP only and needs WLC. however 1252 has both LWAPP and autonomous image.. 1262 doesnt have Autononmous image..

lemme know how this answered ur question

Regards
Surendra

Cisco Employee

Re: AP1262 and AP1252

Surendra is all correct.

For the 1250 the different between AP1250 and LAP1250 is the software image running on it when you receive it.

If you order a AP1250, it will come with IOS image and you will be able to run it without WLC. If you order a LAP1250, it will come with a lwapp/capwap image that will require WLC.

Note however that the hardware is IDENTICAL. You can thus re-image a AP1250 with an lwap/capwap image and make it work with a WLC and you can also re-image a LAP1250 with IOS to make it run standalone.

The trick is that the 1260 has no standalone IOS image at all.

Nicolas

===

Don't forget to rate answers that you find useful

New Member

Re: AP1262 and AP1252

Thanks for you all reply. that's useful for me..

New Member

Re: AP1262 and AP1252

My vendor pointed this out last night -- the 1262s now have IOS/Autonomous version in the software download section. Software was release just last December.

I will try to convert a lightweight to this version over the weekend.

New Member

Re: AP1262 and AP1252

Do you know who to process this IOS to AP1262??  how to import it into Ap1262??

Cisco Employee

Re: AP1262 and AP1252

If your 1262 is currently lightweigth (CAPWAP) , then to put IOS on it :

connect to the AP via console, go to enable mode

type "debug capwap console cli"

type "archive download-sw /f /o tftp://"

Boom, it restarts as IOS standalone :-)

New Member

Re: AP1262 and AP1252

Hi, no command what you said:

AP1cdf.0f**.***1#debug capwap ?
  client  CAPWAP Client Debug Options
  mcast   CAPWAP MCAST Debug Options
  mfp     CAPWAP MFP Debug Options

-------------------------

AP1cdf.0f94.ba91#debug capwap client ?
  config          CAPWAP Client Config Messages
  detail          CAPWAP Client Detail Messages
  error           CAPWAP Client Error Messages
  event           CAPWAP Client Event Messages
  fwd             CAPWAP Client dot11 forwarding
  hexdump         CAPWAP Client Hexdump Messages
  info            CAPWAP Client Info Messages
  lsc             CAPWAP Client LSC Events
  mgmt            CAPWAP Client dot11 mgmt
  packet          CAPWAP Client Packets
  payload         CAPWAP Client Payload Messages
  probe           CAPWAP Client dot11 probe
  reassembly      CAPWAP Client Fragment Reassembly
  tcp-mss-adjust  CAPWAP client MSS adjust
  tcp-mss-print   CAPWAP Client MSS print

AP1cdf.0f94.ba91#debug capwap client

------------------

AP1cdf.0f**.***1#archive?
% Unrecognized command

------------------------------------------------------

There is a New Capwap 1262, But no IOS.  So I want to import IOS into, do you know who to do this??

AP1cdf.0f**.***1#sho flash

Directory of flash:/

    2  -rwx           0   Mar 1 2002 00:27:46 +00:00  config.txt
    3  -rwx         185   Jan 1 1970 00:00:38 +00:00  env_vars
    9  drwx         128   Mar 1 2002 00:26:28 +00:00  ap3g1-rcvk9w8-mx

31481856 bytes total (29198336 bytes free)
AP1cdf.0f**.***1#

-----------------------------------------

ar  1 00:32:55.999: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar  1 00:32:55.999: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.

Cisco Employee

Re: AP1262 and AP1252

it's a hidden command so it doesn't appear with the question mark.

Did you just try to type it ?

New Member

Re: AP1262 and AP1252

I have try, it's working,  But access tftp get some error:

P1cdf.0f**.***1#copy tftp://10.1.1.2/ap1262-k9w7-mx.124-25d.JA flash:
Destination filename [ap1262-k9w7-mx.124-25d.JA]?
Accessing tftp://10.1.1.2/ap1262-k9w7-mx.124-25d.JA...
%Error opening tftp://10.1.1.2/ap1262-k9w7-mx.124-25d.JA (Socket error)
AP1cdf.0f9**.***1#

New Member

Re: AP1262 and AP1252

I have downloaded new IOS image for AP1262:  ap3g1-k9w7-tar.124-25d.JA.tar

But don't know how to import this Image to AP1262, and then AP1262 can be running at standalone without WLC..

.

New Member

Re: AP1262 and AP1252

Yes, , But I just connect my laptop to the AP from Console, How to setup

tftp for this AP can download ios from my Laptop, I have already setup tftp

server in my computer: tftpd32

Thank you.

On Wed, Mar 2, 2011 at 6:13 PM, ndarchis <

Cisco Employee

Re: AP1262 and AP1252

Connect your PC to the network and the AP to the network too. If the AP gets an ip address via DHCP it has network connectivity. you can then download the image from your PC ip address.

New Member

Re: AP1262 and AP1252

it's ok now, Thank you very much

AP1262#sho flash
*Mar  1 00:30:44.859: %SYS-5-CONFIG_I: Configured from console by console

Directory of flash:/

    2  -rwx        6168   Mar 1 2002 00:28:23 +00:00  private-multiple-fs
    3  -rwx         279   Mar 1 2002 00:33:54 +00:00  env_vars
    4  -rwx        1377   Mar 1 2002 00:28:23 +00:00  config.txt
    5  -rwx       22600   Mar 1 2002 00:33:54 +00:00  event.log
    6  -rwx           5   Mar 1 2002 00:28:23 +00:00  private-config
    7  drwx         512   Mar 1 2002 00:33:52 +00:00  ap3g1-k9w7-mx.124-25d.JA

31481856 bytes total (25015296 bytes free)
AP1262#sh

Hall of Fame Super Gold

Re: AP1262 and AP1252

3109
Views
0
Helpful
14
Replies
CreatePlease to create content