AP350 and AP1200 Telnet questions. Pre IOS versions
I have about 180 APs that I need to download their ini files and add SNMP privileges to two user accounts. I know how to do this with the GUI but would like to speed up the process by using telnet. Does anyone know what commands I could use?
Re: AP350 and AP1200 Telnet questions. Pre IOS versions
If you do not enter security information in the conversion template and User Manager is enabled in the AP, you might not be able to log in on the upgraded AP through Telnet, the console port, or the browser. If this occurs, you must reset the AP to its defaults. In this Console/Telnet. Only the Enable and Disable settings are migrated.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...