Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Attempt by ... to Sieze Self IP Address via Proxy ARP to [broadcast]fffffff

In Event-Log at one of many BR350, configured as Non-Root w/Clients, there is this warning: "Attempt by ... to Sieze Self IP Address via Proxy ARP to [broadcast]ffffffffffff".

On webpage of Event Log for this device there is a link to http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/air/ap3xx/EvtWarning.htm#SeizeIP but at this page I can't find anything regarding this warning.

Could please someone give an explanation and hints to avoid this?

Thanks.

2 REPLIES
Bronze

Re: Attempt by ... to Sieze Self IP Address via Proxy ARP to [br

I can only suspect that the issue is related to IP address, check your network for any addressing issues.

New Member

Re: Attempt by ... to Sieze Self IP Address via Proxy ARP to [br

Thanks for your reply.

I multiple validated wlan, e.g. with an network analyser, also relating ip adresses and found nothing which was uncommon. No ip errors, no duplicativ addresses, ...

Cisco's TAC told to me that this warning is related the hot stand by function, but this isn't enabled.

Are there any other ideas?

117
Views
0
Helpful
2
Replies