Authentication + Encryption w/ little or no client configuration?
I am wondering what the best solution would be for someone who wanted Authentication and Encryption and did not want to customize all of their user's wireless profiles. Here are the problems as I see it...
1. 802.1x - Authentication + Encryption but requires client configuration.
2. Web Authentication - Authentication and no Encryption but requires no client configuration.
3. Static WEP + Web Authentication - Authentication and Encryption but requires client configuration.
Am I missing something, is there a better/easier way to go about this? Is there an easy way to rollout a configuration profile?
Re: Authentication + Encryption w/ little or no client configura
You can either use certificates or push the wireless settings that are required for connection through group policy if you have a MS Windows domain. Those are the only two methods of zero-configuration for your clients that I know of.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...