Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Authentication Key Managemen - 802.1X grayed out

Hi, trying to setup machine authentication on WLC (code 7.x) using 802.1x but my options for this under wlan settings/Layer2 is grayed out. Only PSK and FT PSK are available. We are running Microsoft AD and computers i like to authenticate are part of a domain.

Wondering do i need to have AD CA certificate installed on WLC to get this option available?

Appreciate your assistance.

Thanks

3 REPLIES
Hall of Fame Super Silver

Authentication Key Managemen - 802.1X grayed out

You need to make sure that the layer 2 security is set to WPA+WPA2 if your using 802.1x with radius.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
Community Member

Authentication Key Managemen - 802.1X grayed out

yes, it was setup like that.

i had to delete and recreate wlan; now got it all right.

Authentication Key Managemen - 802.1X grayed out

Some time it's happen. For configuration Help you can see the below link

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml#auth-8201

194
Views
0
Helpful
3
Replies
CreatePlease to create content