Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Autonomous 2606i for 802.11n

Sir,

I have the 2606i configured with both radio 0(2.4GHz) and 1(5GHz)  up. They are working. Both radioes should support N. But when I connect my laptop to it, the laptop is connectiong to one of the radio only and with bandwidth 54M only.

How can I configure the AP to achieve 450M as mentioned on the datasheet?

Is there any special command needed?

I attached the show version result for you to verify the HW.

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Autonomous 2606i for 802.11n

You need to make sure your client device is 802.11n supported. With 802.11n you need to either use an open SSID or WPA2/AES. Also on the 5ghz, enable 40mhz channel width.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
4 REPLIES
Hall of Fame Super Silver

Re: Autonomous 2606i for 802.11n

You need to make sure your client device is 802.11n supported. With 802.11n you need to either use an open SSID or WPA2/AES. Also on the 5ghz, enable 40mhz channel width.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Autonomous 2606i for 802.11n

Thank you Scott. The WPA2 make it 450M now.

Hall of Fame Super Silver

Re: Autonomous 2606i for 802.11n

Thanks for the follow up!

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: Autonomous 2606i for 802.11n

Here is a link for another model AP but still relevant.

http://www.cisco.com/en/US/docs/wireless/access_point/1140/autonomous/getting_started/guide/ap1140aut_getstart.html#wp43650

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
241
Views
0
Helpful
4
Replies