Autonomous to LWAP

[Shabeer E]

Dear Gents

I'm using WLC 5508 software ver: 7.4.110.0, would like to convert below automous AP to LWAP. I'm not sure this model of AP support

WLC 7.4 code. Kindly advise any possibilites to get it work with WLC.

AIR-SAP1602I-E-K9

AIR-AP1142N-E-K9

AIR-AP1230B-E-K9

Thanks..

[Stephen Rodriguez · Accepted solution]

the 1230 is the only one that won't work

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html#wp1048617

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered