Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Autonomous to LWAP

Dear Gents

I'm using WLC 5508 software ver: 7.4.110.0, would like to convert below automous AP to LWAP. I'm not sure this model of AP support

WLC 7.4 code. Kindly advise any possibilites to get it work with WLC.

AIR-SAP1602I-E-K9

AIR-AP1142N-E-K9

AIR-AP1230B-E-K9

Thanks..

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions

Autonomous to LWAP

the 1230 is the only one that won't work

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html#wp1048617

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
1 REPLY

Autonomous to LWAP

the 1230 is the only one that won't work

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html#wp1048617

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
141
Views
0
Helpful
1
Replies