Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Binding interfaces on WLC 5508

               Hello, I would like information on binding multiple intefaces from the WLC to a Cisco switch for more bandwidth. Can someone point me in the right direction for this? thank you  

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Binding interfaces on WLC 5508

One more doc:

https://supportforums.cisco.com/docs/DOC-23515

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
4 REPLIES
Hall of Fame Super Silver

Binding interfaces on WLC 5508

Here are some links.  You need to have LAG enabled on the WLC and then you need to create an etherchannel to your switch.  You can connect the WLC to multiple switches if they are in VSS.

https://supportforums.cisco.com/docs/DOC-20587

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_ports_interfaces.html

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Binding interfaces on WLC 5508

One more doc:

https://supportforums.cisco.com/docs/DOC-23515

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
New Member

Binding interfaces on WLC 5508

Thanks these should do it for me.  

Hall of Fame Super Silver

Binding interfaces on WLC 5508

No problem... thanks for rating!

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
152
Views
0
Helpful
4
Replies
CreatePlease login to create content