Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Boot Loader Imagen failed to upgadre

Hi

I've been trying to upgrade the boot image of my WLC4402-12, even following the intructions in the Cisco documentation. The image is correctly transferred from the TFTP but when I reboot the WLC I just see the same old boot image.

Please see the attached picture. Y try the 5.2 main imagen as well as the boot or ER image.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Boot Loader Imagen failed to upgadre

Just remember, 4.2.112 is the last bootloder update.

-Scott
*** Please rate helpful posts ***
3 REPLIES
Hall of Fame Super Silver

Re: Boot Loader Imagen failed to upgadre

That is a cosmetic bug on the wlc. As long as you didn't error during the upgrade you will be fine. 4.2.112.0 ER.aes file is the last ER file to contain a bootloader.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml

-Scott
*** Please rate helpful posts ***
New Member

Re: Boot Loader Imagen failed to upgadre

Ok,so it must be OK, thank you

Hall of Fame Super Silver

Re: Boot Loader Imagen failed to upgadre

Just remember, 4.2.112 is the last bootloder update.

-Scott
*** Please rate helpful posts ***
139
Views
0
Helpful
3
Replies
CreatePlease to create content