What exactly is the problem? Is the connection dropping?
How far apart are these bridges? Are they using internal or external antennas?
To troubleshoot, try placing the bridges into install-mode (configured under dot11Radio0 -> station-role) on all bridges, and ensure that the signal strength is above -67dBm. The higher above this marker, the better. If it's below -67dBm, it might be a signal issue that can be resolve with a larger antenna.
If the distance is large, you should include the "distance" command under the dot11Radio0 interface, and it should be expressed in kilometers. This is very important if your link is over a kilometer.
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...