02-26-2014 08:47 AM - edited 07-05-2021 12:17 AM
Hi,
I´m planning right now a local Guest Access breakout for a Branch Site which is connected over
a HREAP AP to a centraliced WLC . If I have it correctly understand then I´ve to do following:
1. Creat a Guest SSID on the centralized WLC ( 5508 ) / enable local switching for this SSID
2. Create a Guest VLAN on the Branch Site with a local Internet breakout
3. Configure a Trunk port for the HREAP AP on the Branch site ( 1 VLAN for Corportate SSID/ local switching and 1x VLAN for Guest
with local Internet breakout )
Can I use the WLC as DHCP server for the Guest SSID or should I use a local DHCP server ? I know about a feature
"central DHCP Processing " but I never used this before and it is not 100% clear if this can help me in this case.
Thanks for help.
Solved! Go to Solution.
02-26-2014 02:06 PM
Local switching really requires you to have local DHCP. Now this is to support when the FlexConnect ap is in standalone. You can use a centralized DHCP server but wouldn't use the WLC as it's not supported by TAC.
Sent from Cisco Technical Support iPhone App
02-26-2014 09:02 AM
02-26-2014 02:06 PM
Local switching really requires you to have local DHCP. Now this is to support when the FlexConnect ap is in standalone. You can use a centralized DHCP server but wouldn't use the WLC as it's not supported by TAC.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide