Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Bridge and Access point Antennas

hi, please can i use an anntenna of Bridge AIR-ANT2506 for wireless access with access point 1300, the problem is if i have to use an access point annetana or can i use this bridge antenna for wireless access (for users), because it gives good signal for far desitance. Thanks

1 REPLY
Hall of Fame Super Red

Re: Bridge and Access point Antennas

Hi Abderrahim,

Yes, this should be just fine :) Have a look;

The following antennas can be used with the Cisco Aironet 1300 Series:

AIR-ANT2506 5.2dBi omnidirectional mast mount

AIR-ANT24120 12dBi omnidirectional mast mount

AIR-ANT1949 13.5dBi Yagi

AIR-ANT2410Y-R 10dBi Yagi

AIR-ANT3338 21dBi dish

AIR-ANT2414S-R 14dBi sector

AIR-ANT1729 6 dBi patch

From this doc;

http://www.cisco.com/en/US/customer/products/ps5861/products_qanda_item09186a0080221971.shtml

Cisco Aironet Antenna Reference Guide

http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008008883b.html

Cisco Aironet 2.4 GHz and 5 GHz Antennas and Accessories

http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008022b11b.html

Hope this helps!

Rob

138
Views
4
Helpful
1
Replies
CreatePlease to create content