Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Can I connect two CT5760 (Wireless) fow HA just with one stack cable?

Hi guys,

 

I have two CT5760 so but just one of them came with a stack cable. Can I do a HA connection with just one STK cable, I friend of mine intentend to do this ask yesteday and he sent me this output:

 

WLC#show switch stack-ports summary

Sw#/Port#  Port Status  Neighbor  Cable Length   Link OK   Link Active   Sync OK   #Changes to LinkOK  In Loopback  
-------------------------------------------------------------------------------------------------------------------
1/1        DOWN         NONE      Unknown        Yes       No            Yes       0                   No           
1/2        DOWN         NONE      Unknown        Yes       No            Yes       0                   No     

 

 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions

you should be able to do it

you should be able to do it with just one cable, per the 5760 HA guide, two is recommended for a 'full ring':

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/5760_HA_DG_iosXE33.html#pgfId-43194

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
4 REPLIES

you should be able to do it

you should be able to do it with just one cable, per the 5760 HA guide, two is recommended for a 'full ring':

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/5760_HA_DG_iosXE33.html#pgfId-43194

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Thanks Steve. I will try it

Thanks Steve. I will try it today. I've seen both controllers are using Version 03.02.03.SE RELEASE SOFTWARE (fc2) and the Part number is:

 

NAME: "Switch 1", DESCR: "AIR-CT5760-6"
PID: AIR-CT5760        , VID: V03

 

Do you know what mean the last 6 of the description?

 

Thnks

 

Jorge

 

 

 

according to that document,

according to that document, it is the SKU

HTH

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Thanks Steve, I upgraded to

Thanks Steve, I upgraded to IOS XE 03.03.04SE in order to support HA.

85
Views
0
Helpful
4
Replies
CreatePlease to create content