Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Can I convert Lightweight AP to Autonomous?

Hi Folks!

The question is, I have a AIR-AP1131AG-x-K9 and I want install this equipment without a WLC in a branch office.

Can I convert IOS LWAPP to autonomous system? I found how I can do the opposite, so I ask help to solve this problem.

Thanks a lot!

Hector Barbosa

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Can I convert Lightweight AP to Autonomous?

I have a AIR-AP1131AG-x-K9 and I want install this equipment without a WLC in a branch office.

You can enable H-REAP.

 Can I convert IOS LWAPP to autonomous system?

Yes.  Follow the link below and use the guide "Using a TFTP Server to Return to a Previous Release"

http://www.cisco.com/en/US/customer/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Please don't forget to rate our posts.  Thanks.

1 REPLY
Hall of Fame Super Gold

Re: Can I convert Lightweight AP to Autonomous?

I have a AIR-AP1131AG-x-K9 and I want install this equipment without a WLC in a branch office.

You can enable H-REAP.

 Can I convert IOS LWAPP to autonomous system?

Yes.  Follow the link below and use the guide "Using a TFTP Server to Return to a Previous Release"

http://www.cisco.com/en/US/customer/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Please don't forget to rate our posts.  Thanks.

3524
Views
4
Helpful
1
Replies