can not connect from wireless controller to switch
I have one WLC 5508, i set Interface management on port 1 and we have 3 port remaining on controller to use. I try to connect from Management interface to switch but it is not have any connection to switch. I only connect from AP to Interface. i would like to ask for your support. thanks
I have one WLC 5508, i set Interface management on port 1 and we have 3 port remaining on controller to use. I try to connect from Management interface to switch but it is not have any connection to switch.
Don't make sense. 5508 has 8 SFP ports. So far, you've mentioned 4 ports. Where's the other 4?
How are you configuring the ports?
And what do you mean the ports are not working? How are you connecting the WLC to the switch? If it's fibre SFP, what wavelengths are you using?
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
email@example.com. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...