Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

Can't access resources beyond Aironet 1100 AP

I've successfully upgraded one of my Aironet 1100 APs from 12.2(13)JA4 to 12.3(7)JA. However, when I associate a device to the AP I cannot pull an IP address from my DHCP server. The AP is on the same segment as my server DHCP, so there is no routing involved. I also notice I can no longer authenticate to my Cisco Secure Access Server. It seems the real problem is I cannot access resources beyond the AP since I upgraded the IOS.

Has anyone seen this problem? Any help in resolving this issue would be much appreciated.


Re: Can't access resources beyond Aironet 1100 AP

New Member

Re: Can't access resources beyond Aironet 1100 AP

Maybe I need to be clearer on what the issue is.

I don't want to setup an access point as a DHCP server. I already have a Windows 2003 server setup to provide DHCP services.

The problem is after upgrading the firmware on the AP to anything other than 12.2(13)JA4, no associated devices receive an IP address from my Windows 2003 DHCP server through the AP.

There was no change to the configuration of the AP prior to the upgrade or after.

CreatePlease to create content