Booting Primary Image... Press <ESC> now for additional boot options... Detecting hardware . . . .
Cisco is a trademark of Cisco Systems, Inc. Software Copyright Cisco Systems, Inc. All rights reserved.
Cisco AireOS Version 18.104.22.168 Initializing OS Services: ok Initializing Serial Services: ok Initializing Network Services: ok Starting ARP Services: ok Starting Trap Manager: ok Starting Network Interface Management Services: ok Starting System Services: ok Starting Fast Path Hardware Acceleration: ok Starting Switching Services: ok Starting QoS Services: ok Starting FIPS Features: Not enabled Starting Policy Manager: ok Starting Data Transport Link Layer: ok Starting Access Control List Services: ok Starting System Interfaces: ok Starting Management Frame Protection: ok Starting LWAPP: ok Starting Crypto Accelerator: Not Present Starting Certificate Database: ok Starting VPN Services:
ok Starting Security Services: ok Starting Policy Manager: ok Starting Authentication Engine: ok Starting Mobility Management: ok Starting Virtual AP Services: ok Starting AireWave Director: ok Starting Network Time Services: ok Starting Cisco Discovery Protocol: ok Starting Broadcast Services: ok Starting Power Over Ethernet Services: ok Starting Logging Services: ok Starting DHCP Server: ok Starting IDS Signature Manager: ok Starting RFID Tag Tracking: ok starting TSM: ok Starting CIDS Services: ok Starting Ethernet-over-IP: ok Starting Management Services:
Web Server: ok CLI: ok Secure Web: Web Authentication Certificate not found (error).
Welcome to the Cisco Wizard Configuration Tool Use the '-' character to backup System Name [Cisco_37:d1:c0]: Enter Administrative User Name (24 characters max): cisco Enter Administrative Password (24 characters max): *****
Management Interface IP Address: 192.168.10.1 Management Interface Netmask: 255.255.255.0 Management Interface Default Router: 192.168.10.10 Management Interface VLAN Identifier (0 = untagged): 0 Management Interface Port Num [1 to 8]: 1 Management Interface DHCP Server IP Address: 192.168.10.10
AP Manager Interface IP Address: 192.168.10.25
AP-Manager is on Management subnet, using same values AP Manager Interface DHCP Server (192.168.10.10):
Virtual Gateway IP Address: 22.214.171.124
Mobility/RF Group Name: no
Network Name (SSID): cisco Allow Static IP Addresses [YES][no]: no
Configure a RADIUS Server now? [YES][no]: no Warning! The default WLAN security policy requires a RADIUS server. Please see documentation for more details.
Enter Country Code (enter 'help' for a list of countries) [US]: US
Check out bug CSCsd52483. You probably want to try to boot from the secondary image to get the controller up. Then follow the upgrade steps outlined in the release notes to get to the version of code you want to upgrade to.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...