Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cannot Update WLC

Hi, I've been working on updating our WLC we have 3 pair of HA 5508 and everything went well for most of them but the last pair did not update for some reason....

I can't seem to find a diffrence in the configuration between the equipement and was wondering if anyone had this problem.

Error message from the GUI :

Transfer download failed both on active & standby, please retry download

Trying to update from 7.4.121.0 to 7.4.121.21

1 ACCEPTED SOLUTION

Accepted Solutions

you probably need to reboot

you probably need to reboot that HA pair, this happens sometimes and reboots will usually fix it.

If you want to troubleshoot it a bit

 

debug transfer all

 

and watch to see if the full file is sent and able to be decompressed.

 

HTH,
Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
2 REPLIES

you probably need to reboot

you probably need to reboot that HA pair, this happens sometimes and reboots will usually fix it.

If you want to troubleshoot it a bit

 

debug transfer all

 

and watch to see if the full file is sent and able to be decompressed.

 

HTH,
Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Alright I will try to reboot

Alright I will try to reboot tommorow we I can and update again

76
Views
0
Helpful
2
Replies
CreatePlease to create content