Nov 2 15:53:42 c1-145-ap 42: AP:000d.28f2.31ea: *Nov 2 22:53:40.582: %CAPWAP-3-CAPWAP_PAYLOAD_TOO_LARGE: Attempt to send capwap packet with payload exceeding max size. Payload Size: 2057, Maximum Allowed Payload: 1700
Nov 2 15:53:42 c1-145-ap 43: AP:000d.28f2.31ea: -Traceback= 0x5E8E4 0x4B1410 0x43FA08 0x4417E4 0x4429E8 0x2A71ACNov 7 09:24:30 c3-143-ap 61: AP:000c.cea4.8b1a: *Nov 7 17:24:28.630: %CAPWAP-3-CAPWAP_PAYLOAD_TOO_LARGE: Attempt to send capwap packet with payload exceeding max size. Payload Size: 2044, Maximum Allowed Payload: 1700
Nov 7 09:24:30 c3-143-ap 62: AP:000c.cea4.8b1a: -Traceback= 0x5E8E4 0x4B1410 0x43FA08 0x4417E4 0x4429E8 0x2A71AC
These are 1100s in light-weight mode, managed by 5500WLC or WiSMs running 7.0.116 Message appears sporadically, every few weeks, sometimes once in a day, sometimes in bursts, typically from a single AP (out of a flock of ~200 campus-wide), the APs involved tend to live within a particular cluster of buildings.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...