Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CAPWAP/LWAPP config

Is there a way to change the username/password for all the APs connected to a WLAN in one move or command? 

Normally I would go into the individual APs and change the controllers in the WLAN GUI. 

But there's got to be a better way, seeing that I have 30+ APs to manage.

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: CAPWAP/LWAPP config

You can. Under the wlc wireless tab on the left under access points. Global Configuration is what you want.

WIreless | Access Points | Global Configuration

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
3 REPLIES
New Member

CAPWAP/LWAPP config

Normally I would go into the individual APs and change the **controllers** in the WLAN GUI. 

**APs**

Meant to say AP not controller

Hall of Fame Super Silver

Re: CAPWAP/LWAPP config

You can. Under the wlc wireless tab on the left under access points. Global Configuration is what you want.

WIreless | Access Points | Global Configuration

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

CAPWAP/LWAPP config

Wow, thanks a bunch!  Saved me a ton or tedious clicking. 

Thank you.

286
Views
0
Helpful
3
Replies
CreatePlease login to create content