Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Catalyst2950 and Symbol AP3021

Here's something interesting. A small office (A) has a Symbol AP3021 outside acting as a wireless bridge connected to a 2950 switch. The building across the street (B) also has a Symbol AP3021 as a wireless bridge connected to a 2950 switch.

I'm able to telnet into the switch in (A) and see all the desktops connected on the switch in building (B) by viewing the mac-address-table. Also switch (B)'s CDP information can be viewed from the cdp neighbors. Only problem is no ping or telnet is possible to switch (B). Weird. Any thoughts? (Please, Cisco APs is not an option. I've tried.) :)

2 REPLIES
Cisco Employee

Re: Catalyst2950 and Symbol AP3021

I don't know how the Symbol APs work, but you could not do this with Cisco APs! - You would need Bridges.

For one AP to wirelessly connect to another AP, one (or both if multi-hop repeating) of the APs need to be in repeater mode. When an AP is in repeater mode, its Ethernet port is not used.

New Member

Re: Catalyst2950 and Symbol AP3021

Hi, the ap3021 is 2Mbps, it´s recommended to have 11Mbps in radio link.

regards.

186
Views
0
Helpful
2
Replies