Central Auth and EAP-TLS

[IT Services]

A strange problem here.

We have EAP-TLS configured on our Windows 2008 R2 NPS server. We have a 3602i in Flexconnect mode. When we set the WLAN to central auth this does not work but rather PEAP-MSCHAPv2 works?

When we switch the WLAN to local auth the EAP-TLS seems to kick in and work. The NPS server has both the AP and WLC set as RADIUS clients and does not show any errors. With Local Auth and Central auth the AAA requests are going to the same NPS server.

Thoughts?

[Viten Patel]

Will need to look at the debugs

Debug client

Sent from Cisco Technical Support iPhone App

[Abha Jha]

logs are required to check the error message and give some suggestions.

[kaaftab]

Kindly check the following link

   http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080bfb19a.shtml

[IT Services]

This has been resolved. Not sure what it was but it is working just fine now.

Sorry