Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

cisco 1130AG Access point's radio will get down frequently?

Dear Friends,

One of my Wi-Fi site, having cisco_1130AG access points nearly 110nos

as of now i installed 80nos, after installing, in out off 80nos nearly 12nos of APs's radio is showing down.

Again i reset and re-configure then it is working fine,

is there any readio (802.11g/a) problem in this model?

if there is a problem with radio, how to fix ?

Thanks,

Srinivas. N

Thanks & Regards, Srinivas. N.
Everyone's tags (6)
6 REPLIES
Hall of Fame Super Silver

Re: cisco 1130AG Access point's radio will get down frequently?

I don't know of any issue, but is the autonomous or lightweight access points. It seems like you have a workaround though.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Gold

cisco 1130AG Access point's radio will get down frequently?

More information please.

Is your WAP in autonomous or controller-based IOS?

Can you post the entire bootup process of the WAP that is exhibiting this sort of behaviour?

New Member

cisco 1130AG Access point's radio will get down frequently?

User Access Verification

Username: cisco

Password:

LEVEL-0_CONHALL2_002>en

Password:

LEVEL-0_CONHALL2_002#sh ver

Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.4(21a)JA1, RELEASE

SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Wed 16-Sep-09 18:36 by prod_rel_team

ROM: Bootstrap program is C1130 boot loader

BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (

fc2)

LEVEL-0_CONHALL2_002 uptime is 2 weeks, 3 days, 21 hours, 8 minutes

System returned to ROM by power-on

System image file is "flash:/c1130-k9w7-mx.124-21a.JA1/c1130-k9w7-mx.124-21a.JA1

"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-AP1131AG-N-K9    (PowerPCElvis) processor (revision C0) with 24566K/81

92K bytes of memory.

Processor board ID FGL1511V14P

PowerPCElvis CPU at 262Mhz, revision number 0x0950

Last reset from power-on

1 FastEthernet interface

2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 64:00:F1:4D:77:56

Part Number                          : 73-8962-14

PCA Assembly Number                  : 800-24818-13

PCA Revision Number                  : B0

PCB Serial Number                    : FOC15091P6K

Top Assembly Part Number             : 800-29230-02

Top Assembly Serial Number           : FGL1511V14P

Top Revision Number                  : A0

Product/Model Number                 : AIR-AP1131AG-N-K9

Configuration register is 0xF

LEVEL-0_CONHALL2_002#

Thanks & Regards, Srinivas. N.
Hall of Fame Super Gold

cisco 1130AG Access point's radio will get down frequently?

1.  Please post the "sh logs".

2.  Reboot the WAP and post the entire bootup process.

Cisco Employee

cisco 1130AG Access point's radio will get down frequently?

Is it just the RADIO resetting or the AP??

Please provide show tech from the AP to proceed further!!

Regards

Surendra

New Member

Hello Srinivas,I believe that

Hello Srinivas,

I believe that you might have already found the solution. - Ios upgrade.

There is bug in version 124-21a.JA1, which causes radio interface to be reset status.

727
Views
0
Helpful
6
Replies
CreatePlease to create content