Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco 1142 not joining controller cisco 2106

can any one explain me what are the causes of this erros ?

we are talking about a cisco Ap 1142 joining a controler cisco 2106

*Nov 26 10:18:40.595: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
transport input ssh
                 ^
% Invalid input detected at '^' marker.

RSSI IDB null
RSSI IDB null
%Error opening lwapp:/c1140 (Protocol error)
archive download: takes 6 seconds

*Nov 26 10:18:46.594: %LWAPP-3-CLIENTERRORLOG:  Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)

*Nov 26 10:18:46.595: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 26 10:18:46.595: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 26 10:18:46.607: %LWAPP-3-CLIENTERRORLOG: not receive read response(3)
*Nov 26 10:18:46.611: lwapp_image_proc: unable to open tar file
*Nov 26 10:19:46.606: %LWAPP-3-CLIENTERRORLOG: Set Transport Address: no more AP
manager IP addresses remain
examining image...
*Nov 26 10:19:46.614: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Nov 26 10:22:56.593: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
transport input ssh
                 ^
% Invalid input detected at '^' marker.

RSSI IDB null
RSSI IDB null
%Error opening lwapp:/c1140 (Protocol error)
archive download: takes 6 seconds

*Nov 26 10:23:02.593: %LWAPP-3-CLIENTERRORLOG:  Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)

*Nov 26 10:23:02.594: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 26 10:23:02.594: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 26 10:23:02.603: %LWAPP-3-CLIENTERRORLOG: not receive read response(3)
*Nov 26 10:23:02.607: lwapp_image_proc: unable to open tar file
*Nov 26 10:24:02.603: %LWAPP-3-CLIENTERRORLOG: Set Transport Address: no more AP
manager IP addresses remain
examining image...
*Nov 26 10:24:02.610: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Nov 26 10:22:56.593: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
transport input ssh
                 ^
% Invalid input detected at '^' marker.

RSSI IDB null
RSSI IDB null
%Error opening lwapp:/c1140 (Protocol error)
archive download: takes 6 seconds

*Nov 26 10:23:02.593: %LWAPP-3-CLIENTERRORLOG:  Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)

*Nov 26 10:23:02.594: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 26 10:23:02.594: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 26 10:23:02.603: %LWAPP-3-CLIENTERRORLOG: not receive read response(3)
*Nov 26 10:23:02.607: lwapp_image_proc: unable to open tar file
*Nov 26 10:24:02.602: %LWAPP-3-CLIENTERRORLOG: Set Transport Address: no more AP
manager IP addresses remain
examining image...
*Nov 26 10:24:02.610: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Nov 26 10:22:56.594: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
transport input ssh
                 ^
% Invalid input detected at '^' marker.

RSSI IDB null
RSSI IDB null
%Error opening lwapp:/c1140 (Protocol error)
archive download: takes 6 seconds

*Nov 26 10:23:02.594: %LWAPP-3-CLIENTERRORLOG:  Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)

*Nov 26 10:23:02.594: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 26 10:23:02.594: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 26 10:23:02.604: %LWAPP-3-CLIENTERRORLOG: not receive read response(3)
*Nov 26 10:23:02.608: lwapp_image_proc: unable to open tar file
*Nov 26 10:24:02.603: %LWAPP-3-CLIENTERRORLOG: Set Transport Address: no more AP
manager IP addresses remain
examining image...
*Nov 26 10:24:02.611: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Nov 26 10:27:12.594: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
transport input ssh

7 REPLIES
Hall of Fame Super Gold

Re: cisco 1142 not joining controller cisco 2106

*Nov 26 10:24:02.603: %LWAPP-3-CLIENTERRORLOG: Set Transport Address: no more AP manager IP addresses remain


How many APs can the WLC support and how many are already joined?
What's the firmware the WLC is running?
Does the AP have a valid IP address?

New Member

Re: cisco 1142 not joining controller cisco 2106

he can support up to six ap´s and i only have one

WLC

Software Version4.2.205.0


and the dhcp in the wlc has provided a ip to the ap

Hall of Fame Super Gold

Re: cisco 1142 not joining controller cisco 2106

You just solved your own problem.

The firmware 4.2.205.0, unfortunately, does NOT support 1140.  I believe you need either the latest version of the 5.0 or 6.x.

NOTE:  I'm no fan of the 5.X firmware.  I personally recommend the 6.X.

Message was edited by: leolaohoo

New Member

Re: cisco 1142 not joining controller cisco 2106

where can i get it ?? at cisco ? it asks me for a user with some privileges that i dont have... already tried to download it.

Hall of Fame Super Gold

Re: cisco 1142 not joining controller cisco 2106

Contact your Cisco authorized reseller and ask them for either one of the following (or both): 
1.  Ask for a valid service contract.  The service contract will allow you to download the firmwares and create TAC cases (don't tell them this bit).

2.  Ask them to download the firmware for you.

If the reseller refuses (tell me something I don't know!), then you go to Plan "B".

Get the s/n of your WLC and the 1140 and create a Cisco TAC Case with it and request for the firmware to be emailed to you.  During the creation of the TAC Case Cisco will ask you (in radio buttons) something in the words like, click here if you are sure you have a valid service contract number and someone will get in touch with you.

The Cisco contracts team will verify the authenticity and if it is authentic the contracts team can insert the valid service contract number to your CCO account.

Hope this helps.

New Member

Re: cisco 1142 not joining controller cisco 2106

gonna try all those.. ..thank you very much..

for more than a month that im trying to get those 2 together...

thank you again..

Hall of Fame Super Gold

Re: cisco 1142 not joining controller cisco 2106

Please rate if my post is helpful or applicable.  Thank you.

3537
Views
5
Helpful
7
Replies
CreatePlease login to create content