I am currently using a Cisco 1200 AP with windows IAS 2003 for the wireless solution. I have also implemented client and server certicate for both the client and the IAS server. The problem here is that I am able to get connected to the wireless AP and the IAS server logs a successful authentication but I am getting an invalid IP 169.254.177.45. I have tested using peap/chapv2 but also getting the same problem.
Looks like you have not configured the DHCP server for the clients connecting to the AP. The clients can either be configured with a static IP address or must be configured to receive IP from a DHCP server. Check if the DHCP server is configured to provide IP for the clients. This should solve the problem.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...